Revive Water System XL

Revive Water System XL is the larger six-stage marine treatment system for use after primary water treatment, including a watermaker. It supports up to 4 GPM and combines UV, mineral media and coconut activated charcoal. Confirm its position in the vessel’s tank and distribution arrangement before installation.

Post-watermaker treatment for the vessel

The Revive Water System XL is intended for a broader onboard water installation than the under-sink Compact model. Its larger fittings and up-to-4-GPM flow support the manufacturer’s post-watermaker application. It treats freshwater produced by the upstream equipment; it is not a raw-seawater watermaker.

How the six stages are arranged

The product specification lists UV light, far-infrared ceramic balls, Maifan stone, alkaline rocks, calcium stones and coconut activated charcoal. The combination provides UV treatment followed by media contact and carbon filtration. No fixed final pH or mineral concentration is specified for every source-water condition.

Plan the tank connection before fitting

Place the XL after primary treatment and obtain the approved arrangement for the particular vessel. Confirm its position relative to storage tanks with Revive before finalising the pipework. Allow access in the watermaker or machinery area for service and choose the power option that matches the available supply.

Media and UV maintenance

Use the XL refill kit for the five media stages. The manual gives a six-month media interval and annual or 9,000-hour UV replacement. The lamp and media are separate service items; keep both in the maintenance plan.

Specifications

Frequently asked questions

Should Revive Water System XL go before or after my freshwater tanks?

Obtain Revive’s confirmed arrangement for your vessel before installing it. The system belongs downstream of primary water treatment; the tank position must be resolved for the particular installation.

Can Revive Water System XL replace my seawater watermaker?

No. Revive positions the XL after a watermaker to treat its freshwater output. It does not take the place of the upstream seawater reverse-osmosis system.

Should I choose Revive Water System XL or Compact for several onboard outlets?

Revive positions XL for a broader water-system installation at up to 4 GPM. Compact / 1.0 is the dedicated-faucet option at up to 2 GPM. Match the arrangement and required flow before ordering.

Can I use Compact refill kits when servicing Revive Water System XL?

Order the separate XL refill kit. Revive lists Compact and XL media packs separately; compatibility should not be assumed from the fact that both systems have six treatment stages.

Can Revive Water System XL run on 24 V DC instead of shore power?

A 24 V DC option is available. Select the matching power configuration; 12 V DC, 110 V AC and 220 V AC choices are also listed.

Related products and supplies

XL replacement media

XL starter package

Compare Compact / 1.0