Revive Water System 1.0

Revive Water System 1.0, now named Compact by the manufacturer, is a six-stage under-sink system for a dedicated marine drinking-water faucet. It combines UV, mineral media and coconut activated charcoal, with flow up to 2 GPM and a choice of AC or DC power.

Treatment at the drinking-water outlet

Revive Water System 1.0 is the smaller Revive marine system, intended for a galley or other dedicated drinking-water outlet. Its Compact designation identifies the current manufacturer product corresponding to Yacht-Mate’s 1.0 listing. Select it when treatment is needed at a single point of use; the XL is the separate higher-flow option.

Six stages in one system

Water passes through the UV stage and the listed ceramic, stone, alkaline and calcium media before coconut activated charcoal. These stages combine UV treatment, mineral media contact and carbon filtration. They do not establish a guaranteed final mineral concentration or pH for every incoming water supply.

Planning the installation

Provide a cold potable-water supply, an accessible under-sink location and the correct power pack. Options are 12 V DC, 24 V DC, 110 V AC and 220 V AC. An accumulator tank is available as an option for higher demand; confirm that accessory separately from the base system.

Keeping the system in service

Use the Compact / 1.0 refill kit for the media stages and the correct UV replacement component. The manufacturer manual specifies media service at six months and UV replacement annually or at 9,000 hours. Keep the manual with the vessel’s service records.

Specifications

Frequently asked questions

Is Revive Water System 1.0 the right choice for one galley tap or the whole yacht?

The 1.0 / Compact is intended for a dedicated drinking-water faucet, with flow up to 2 GPM. Revive positions the XL for a broader post-watermaker installation at up to 4 GPM.

Do I need an accumulator tank with Revive Water System 1.0?

Revive offers an optional accumulator for higher demand. It is an accessory to assess for the proposed tap and supply arrangement, not an item to assume is included in the base system.

Can Revive Water System 1.0 use the yacht’s 24-volt supply?

Yes, a 24 V DC power option is listed. Select that configuration when ordering; the range also offers 12 V DC, 110 V AC and 220 V AC options.

Which refill should I order for an older Revive Water System 1.0?

Order the Compact / 1.0 media refill and confirm the installed system identification. The current Compact name corresponds to the smaller system; XL has a separate refill product.

Does a glowing UV lamp mean my Revive Water System 1.0 is still within its service life?

No. Follow the scheduled UV replacement even if the lamp remains lit. The manufacturer explains that UV output declines with age; visible illumination is not a service-life measurement.

Related products and supplies

Compact / 1.0 refill kit

Compact / 1.0 starter kit

Compare Revive XL