ECOmar Non Certified CE Only Models

This Yacht-Mate listing covers Tecnicomar ECOmar 6, 8, 16 and 24 marine wastewater treatment systems in the non-certified, CE-only category. These model names belong to the earlier ECOmar range and must be distinguished from the ECOmar S series when selecting equipment or requesting replacement parts.

Treatment and onboard use

ECOmar treats blackwater and greywater using chemical-physical reactions to disinfect wastewater and reduce the size of suspended solids. The existing product specification describes automatic seawater washing at the end of each cycle and automatic operation with emergency manual operation. The stainless steel central body is mounted on a steel chassis for onboard installation.

Specify the exact system

Send the vessel details and requested treatment capacity through the Vessel Specs Form. Include the tank arrangement, crew and guest numbers, toilet type, voltage, frequency, phase and existing pipe size. Obtain the exact model’s capacity, electrical schedule and arrangement drawing before ordering or planning a retrofit.

Product specifications

Controls, installation and maintenance

Listed options include a 7-inch LCD touchscreen remote, CDMAR-2 control, onboard PC control and an air purifier. Confirm options against the installed or proposed controller. Use the system-specific manual for disinfectant selection, dosing, seawater washing and maintenance. Keep the serial number and pump identification available when ordering spares through the request form.

Approval and discharge requirements

This product is listed as non-certified, CE only. The listing does not establish IMO, MARPOL or USCG approval or permission to discharge overboard. Confirm the specific equipment and vessel requirements before purchase. For the separate S range, see ECOmar S marine sewage treatment systems.

Frequently asked questions

Can I order ECOmar 6, 8, 16 or 24 using the ECOmar S capacity figures?

No. These are separate model designations. The CE-only listing covers ECOmar 6, 8, 16 and 24. Provide the required daily wastewater load through the Vessel Specs Form and obtain the technical sheet for the exact version being supplied before selecting the unit.

Can this CE-only ECOmar listing be specified as an IMO-certified sewage plant?

This listing identifies the models as non-certified, CE only. Do not use it as evidence of IMO, MARPOL or USCG approval. The MCA’s historical bulletin lists ECOmar 6, 8, 16 and 24 among equipment affected by MED certification withdrawal. Obtain written confirmation of the proposed equipment’s status for your vessel.

Can the CE-only ECOmar treat both the yacht’s greywater and blackwater?

The ECOmar range is described for both wastewater streams. Its chemical-physical process disinfects wastewater and reduces the size of solids. Include separate or combined tank details in the Vessel Specs Form so the proposed arrangement can be checked.

What information does Yacht-Mate need when replacing a pump on my older ECOmar?

Use the Spare Parts Request tab and provide the vessel name, system serial number and year. Match the installed pump to the parts drawing and specify the component required. The existing library includes DC31, BC/BCM, S24, C30 and AT25 drawings, but a drawing alone does not establish compatibility with every ECOmar model.

Can an existing ECOmar be monitored away from the engine room?

The listed options include a 7-inch LCD touchscreen remote, CDMAR-2 remote control and onboard PC control. Identify the system model, year and controller when requesting an option so compatibility with the installed equipment can be confirmed.