clean-exhaust injects ecoBrew™ into the generator’s raw water cooling system just before the spray ring where the ecoBrew™ binds the particulate in unburned fuel to seawater. The emulsified soot tumbles through the gas/water separator muffler and is expelled biodegrading away from the vessel’s hull. The remaining gas exhaust that is discharged into the air contains little or no particulate which facilitates a cleaner water line on the vessel, no floating sludge in the water and fresher air for the Owners, Crew, and Guests to breathe.

The post ecoBrew™ for Clean-Exhaust Systems case of 4 appeared first on Yachtmate Products.

clean -exhaust has been integrated into a compact design with long service life that requires miniscule power to run…less than a light bulb. It has been configured to fit into many different engine room space requirements. The dosing pumps and electronics can be remote from the ecoBrew™ storage tank. An average installation takes three days with our system specialists. The monthly maintenance is minimal.

clean -exhaust injects ecoBrew™ into the generator’s raw water cooling system just before the spray ring where the ecoBrew™ binds the particulate in unburned fuel to seawater. The emulsified soot tumbles through the gas/water separator muffler and is expelled biodegrading away from the vessel’s hull. The remaining gas exhaust that is discharged into the air contains little or no particulate which facilitates a cleaner water line on the vessel, no floating sludge in the water and fresher air for the Owners, Crew, and Guests to breathe.

Prior to or during the installation of clean -exhaust , a thorough cleaning of the vessel’s exhaust piping and muffler is recommended. This initial cleaning process will produce immediate results from the clean- exhaust system.

clean -exhaust has over 5 years of testing on vessels with thousands of hours of operational time under the watchful eyes of highly trained Engineers.

The post Clean-Exhaust System appeared first on Yachtmate Products.

Features
• Capacity: the EverHot system delivers 190° hot water instantly from a compact half gallon reservoir (60 cups per hour or 48 ounces at once).
• Installation: quick and easy fast connection by John Guest® fittings.
• Tank: stainless steel.
• Thermostat: water temperature can be regulated by adjusting temperature knob on the front of the heating tank.
• Waterways: blue label tank is reverse osmosis compatible, red label tank is for filtered water only.
• Electrical Requirements: 6.8 Amps, UL listed. A 3 prong grounding type, 115 Volt wall receptacle is required; 15 or 20 Amp circuit is acceptable.
• Includes 3′ power cord with 3-prong plug.
• 220/240 Volt available for export. Power cord attached, no plug included.
• Average Energy Cost: less than $2/month.
• Servicing: requires no regular maintenance.
• Maximum Dimensions: 9″ depth x 7″ width x 13″ height.
• Shipping Wt.: Tank only, 7 lbs./Tank w/ faucet, 10 lbs.
• Cleaning: usually a damp soft cloth is all that is required to clean your EverHot faucet. See care instructions packaged with faucet.
• An ideal complement to an EverCold undersink water chiller.
• Can be used with a Body Glove Water Filter System for protection against bad tastes, lead, asbestos, rust, aesthetic chlorine, cysts, V.O.C.s, THMs, and other contaminants.

The post EverHot LVH510HC Instant Hot Undersink Water Dispenser appeared first on Yachtmate Products.

SharkBite products eliminate the need for special tools, glue or solder, enabling faster installations with less risk of errors. The SharkBite system includes a wide range of fittings, PEX pipe, outlet boxes, valves and other plumbing accessories needed to plumb a potable water system from meter to fixture.

Contact Yacht-Mate Products for more information and to buy SharkBite plumbing fittings.

See the Price List in Brochures Tab.

The post Sharkbite Plumbing Fittings appeared first on Yachtmate Products.

The reel housing is constructed from highly polished 316L stainless steel and is available in various lengths of UV resistant line, ranging from 80 – 330 feet (40m – 100m).

ULTRALINE *Dyneema®, the ULD series, uses a floating dyneema line making it perfect for use as a mooring line while ULTRALINE Polyester, the ULP series, uses a sinking polyester line making it perfect for use as an anchor line.

Line deployment and retrieval is as simple as letting the line pay out as needed, then winding it up when done. The flat rope must be cleated off when anchored or mooring as it is not a load bearing device. The line is self storing and non-fouling, meaning no more uninvited sea creatures on board. The rope comes with a pre-fabricated stitched eye at one end while the other is fastened to the spool. Also included is a multi – functional winch handle and comprehensive mounting kit.

The ULTRALINE Flat Rope Reel is suitable for standart rail or bulkhead mount installation and comes with a three year warranty. The appearance is sleek, compact, and an ideal solution for a stern anchor or mooring line. The flat rope’s bitter end is attached to the housing with velcro that will release without damaging the rail or bulkhead when it is forced.

According to users of the ULTRALine Flat Rope Reel

• Lots of Line! Little Space!
• Easy to use.
• Won’t tangle, never snags.
• Easy to mount.
• Easily detected from far away, safe.
• Uninvited visitors (rats) cannot come through it.
• Won’t rust, 316L stainless steel construction.

The post ULTRALINE Flat Rope Reel appeared first on Yachtmate Products.

The breaking strength of the swivel is typically higher than the chain it is connected to and allows 30 degree rotation with complete 360 degree swivel. The ULTRA Flip Swivel is fabricated with a unique flipping nub and rear bridge; assisting to recover the anchor right-side up into the bow roller. This flipping nub, combined with the ULTRA Flip Swivels rotation and complete 360 degree swivel ability, ensures setting and recovering your anchor is an easier and safer task.

Hexagonal head locking bolts prevent the need for additional grub screws to secure the swivel pins, and every ULTRA Flip Swivel has the breaking strength listed on the rear of its one piece body. The best results are taken especially by ULTRA Anchor. This way the best harmony is achieved.

Supplied with a standard 5 year warranty the ULTRA Flip Swivel incorporates unique design features and advantages, which makes it the world’s most advanced anchor swivel.

ADVANCED SWIVEL FOR ADVANCED ANCHORING

Features and Benefits

• Ultra Flip Swivel is the strongest device available to connect anchor rode to anchor- put an end to weaker swivels and shackles
• Ultra Flip Swivel is designed to take side load up to the breaking strength of the Swivel – no need for shackle or chain between swivel and anchor as needed with other swivels that are not designed to take a side load
• Compact design of the Ultra Flip Swivel shortens the required length between windlass and bow roller – reduces clutter on the foredeck and saves deck space
• Constructed of polished 316L stainless steel — it will never rust or break, its breaking strength is greater than the chain
• Hex headed pins with retaining screw will not rotate or work themselves free
• Swivel ball allows the chain to move 30 degrees in any direction without disturbing or dislodging a set anchor
• Bullet shape provides easy passage of connector and anchor over bow roller – will not bind like shackles
• Open ball and socket design is self-cleaning so it always rotates
• Teflon coated ball provides a more durable surface while ensuring a smoother rotation
• Bridge loop supports anchor over the roller while the nub forces it to the side so anchor’s own weight causes it to rotate into proper position, thus providing easier retrieval of the anchor and avoiding wear and tear on personnel, windlass and deck hardware
• Ultra Flip Swivel enhances safety in that it reduces your time on a rolling deck. No more reaching over the bow rail to rotate the anchor into position to stow it

The post Ultra Flip Swivel appeared first on Yachtmate Products.

The ULTRA Anchor demonstrates why a correct weight distribution and design is so important when setting and recovering your anchor. In fact, invert any ULTRA Anchor and it will instantly recover itself into attack position.

Such performance has been achieved with the innovative patented features this anchor displays; including a curved lead filled tip for instant penetration, a hollow shank for optimal weight distribution, concaved base surfaces for maximum holding power and large side wing plates to avoid release during changing wind or tide conditions. Furthermore, each anchor is easily recoverable with the flat pivot surface on the underside base.

The ULTRA Anchor is suitable for all vessel types and locates securely onto the bow roller. ULTRA Anchor range in size from 5kg (11lbs.) to 360 kg (800lbs.). Sourcing Europe’s finest materials and fabricated by specialist engineers, the ULTRA Anchor is supplied with a LIFETIME WARRANTY.

ANCHOR SETS IN ITS OWN LENGTH!

Features and Benefits

• Sturdy one-piece construction of 316L stainless steel
• Lead filled base and hollow shank forces anchor to set point first immediately
• Concave fluke for great holding power
• American Bureau of Shipping (ABS) Approval
• Lifetime warranty

The post Ultra Anchor appeared first on Yachtmate Products.