3M Aqua-Pure AP110 Filter

3M Aqua-Pure AP110 Filter

The 3M Aqua-Pure AP110 is a drop-in sediment filter cartridge used in compatible Aqua-Pure housings. 3M identifies the AP110 series as particulate-reduction cartridges, while Yacht-Mate lists this AP110 as a 5-micron cartridge for standard 2.5-inch x 10-inch housings.

Product Specifications

• Manufacturer: 3M Aqua-Pure
• Model: AP110
• Product type: Drop-in sediment cartridge
• Yacht-Mate listed micron rating: 5 micron
• Yacht-Mate listed size: Standard 2.5" x 10"

Where is the 3M Aqua-Pure AP110 used onboard?

It can be used in a compatible standard drop-in housing as a sediment-filtration stage. On a yacht, confirm the housing size and whether the system calls for a 5-micron sediment cartridge.

How do I choose the correct replacement or configuration?

Match the AP110 model, nominal cartridge size and required micron rating. Do not assume that every 10-inch filter housing accepts the same cartridge diameter.

For related onboard filtration products, browse Yacht-Mate’s water filters and housings and yacht water filters and housings.

Additional Product Details

Removes sand, rust, and particulates from onboard water systems at 8 gpm with a 10,000-gallon capacity. The 3M Aqua-Pure AP110 is a 5-micron sediment filter cartridge designed for standard 2.5-inch x 10-inch filter housings — one of the most widely used housing sizes across marine water filtration systems worldwide. It removes sand, rust, silt, and particulate matter from incoming water before it reaches pumps, watermaker membranes, UV sterilizers, and onboard plumbing. At 5 microns, the AP110 captures finer particles than coarser pre-filters, making it suitable as a second-stage sediment filter in a multi-stage system or as a standalone sediment cartridge ahead of a carbon or drinking water filter. Its 8 gpm flow rate and 10,000-gallon capacity make it a practical choice for regular replacement on vessels with moderate daily water consumption. The AP110’s standard 2.5″ x 10″ sizing means replacement cartridges are available from suppliers worldwide — an important consideration for cruising boats sourcing filters in the Caribbean, Mediterranean, or beyond. Features include: 5 micron nominal Average life: 6 months (incoming water quality may affect cartridge life) Flow Rate: up to 8 gpm/30.3 lpm (housing dependent) 2.5 in/6.35 cm by 9.8 in/24.9 cm 25-125 psi/172-862 kPa pressure range 40-100°F/4.4-37.8°C temperature range

Frequently Asked Questions About 3M Aqua-Pure AP110 Filter

What does the 3M Aqua-Pure AP110 filter remove?

The AP110 is a particulate/sediment cartridge. Yacht-Mate lists the product at 5 microns; use it where the installed filtration system specifies this rating.

Does the AP110 fit a standard 10-inch filter housing?

Yacht-Mate lists this cartridge for standard 2.5-inch x 10-inch housings. Confirm the housing dimensions before ordering.

How often should the 3M AP110 be replaced?

3M notes that cartridge life varies with local water conditions and consumption. Replace according to the housing/system maintenance guidance and actual pressure-drop or flow conditions.

Is the AP110 a carbon filter?

No. The AP110 is a sediment/particulate cartridge, not a carbon-treatment cartridge.